power chip inductors - 1008ps series document 219 specifications subject to change without notice. document 219 revised 11/28/00 coilcraft?s new 1008ps series is designed to be an economical alternative to larger and more costly shielded power inductors. only 2.6 mm high, they are ideal for applications requir- ing magnetic shielding, the smallest possible size and lowest cost. typical uses include notebook computers, pc cards, wireless communication and handheld de- vices. the specially designed ferrite cover provides magnetic shielding and the best possible surface for pick and place handling. for free evaluation samples, contact coilcraft or visit www.coilcraft.com . abcdefg 0.15 0.15 0.10 0.10 0.08 0.07 0.02 3,7 3,7 2,6 2,5 2,0 1,7 0,5 part inductance dcr max srf typ i sat i rms number (h) 20% (ohms) (mhz) (a) (a) 1008ps-102 1.0 0.05 344 3.0 2.90 1008ps-152 1.5 0.06 260 2.8 2.55 1008ps-202 2.0 0.075 225 2.1 2.20 1008ps-352 3.5 0.126 185 1.3 1.95 1008ps-392 3.9 0.166 175 1.2 1.50 1008ps-472 4.7 0.30 160 1.0 1.30 1008ps-572 5.7 0.32 150 1.0 0.95 1008ps-103 10 0.8 105 0.775 0.75 1008ps-153 15 1.03 35 0.700 0.70 1008ps-223 22 1.22 26 0.65 0.60 1008ps-333 33 1.55 20 0.510 0.58 1008PS-473 47 2.2 19 0.400 0.48 1008ps-683 68 3.30 12 0.310 0.40 1008ps-823 82 3.7 9 0.300 0.35 1008ps-124 120 6.0 7.0 0.25 0.31 1008ps-154 150 6.4 5.8 0.215 0.28 1008ps-224 220 9.4 10 0.220 0.24 1008ps-334 330 10.6 3.8 0.200 0.22 1008ps-474 470 13.0 3.1 0.160 0.20 1008ps-564 560 16.7 2.8 0.130 0.18 1008ps-684 680 18.5 2.5 0.120 0.17 1008ps-824 820 24 1.5 0.100 0.16 1008ps-105 1000 29 2 0.100 0.14 1. inductance measured at 100 khz, 0.1 vrms, using coilcraft smd-a fixture in agilent 4263b impedance analyzer with coilcraft-provided correlation pieces. for recommended test procedures, contact coilcraft. 2.q measured using hp16193 test fixture and on hp8753d with coilcraft smd-d test fixture. 3.srf measured using hp8753d network analyzer and coilcraft smd-d test fixture. 4.dcrmeasured on cambridge technology micro-ohmmeter and coilcraft ccf 840 test fixture. 5.operating temperature range -40 c to +125 c. 6.electrical specifications at 25 c. parts/reel: 13 ? 2500 tape width: 12 mm for packaging data see ? tape and reel specifications ? (document 173)
|
